# Resin print exposure calibration
# Scope: Jacobs working curve using experimentally supplied penetration depth and critical dose.
# Status: illustrative worked example; engineering review pending.
# Inputs are example values. Checks are editable example requirements, not standards.

penetration = 0.1 mm
criticalDose = 5 mJ/cm^2
irradiance = 5 mW/cm^2
exposure = 2 s

dose := irradiance*exposure [mJ/cm^2]
cureDepth := penetration*log(dose/criticalDose) [mm]

check cure depth target: cureDepth >= 0.05 mm

scenario alternative: penetration = 0.08 mm