# Solid-volume material mass, before supports and infill geometry
length = 100 mm in 50..200
width = 50 mm in 20..100
height = 20 mm in 5..50
infill = 0.2 "Approximate fraction; excludes skins and supports"
density = 1240 kg/m^3 "Illustrative PLA"
grossVolume := length * width * height [m^3]
estimateMass := grossVolume * infill * density [kg]
check material budget: estimateMass <= 0.1 kg
scenario dense: infill = 0.5